Adds new definitions for Dell, Fuji Xerox, HP, Kyocera Mita, Minolta, Ricoh, and Xerox printers and multi-function devices. Includes validated definitions for devices from Fuji Xerox, HP, IBM, Konica, Kyocera Mita, Lexmark, Ricoh, Tektronix, Xerox and others.
The PrintKit Printer Model Supplement 2.2-10 contains new model definitions. The definitions in this supplement have been validated for correctness.
For more recent models, and additional models that may not be fully validated, see the current Preliminary Printer Model Supplement.
This kit should be applied to PrintKit 2.2-3 or later 2.2 versions ONLY.
The Quick Start document includes installation instructions and release notes. It is also included in the installation kit downloads.
|Quick Start||text, 13.3 kb|
The downloadable installation kit is a single self-extracting archive. Once you've transferred this file to your OpenVMS system, you run the file to unpack the individual components of the distribution, which consist of a VMSINSTAL saveset and the Read Me document.
The downloadable kit is a binary file. Be sure to keep this in mind if you need to transfer it between systems. (For instance, use TYPE IMAGE with FTP.) It should appear on your OpenVMS system with fixed-length 512-byte records.
Separate versions of the kit are provided for each of the OpenVMS hardware architectures. Each version contains a full kit – once unpacked, it can be installed on any of the hardware architectures – but each architecture requires its matching version of the self-extract code.
|PKMODELS 2.2-10||alpha, 7.29 mbvax, 7.28 mb|
This kit supplies definitions for the following printer models. For each model, version numbers indicate the revision of the preliminary Supplement Kit which introduced the definition, and any revisions which changed it.
Corrects a problem in printing the PSM$ANNOUNCE text on separator pages. This involves replacing several library modules.
Corrects problems with model definitions for printers that do not support PostScript job synchronization using Ctrl-D. This involves replacing several library modules.
Corrects a problem in the PostScript layup handling that caused an error with some printer models. To do this, it replaces the KIT_PS__NUP module in the PrintKit device control library.
Corrects a problem in the PostScript separator page display that caused an error with some printer models. To do this, it replaces the KIT_PS_SEP_INFO module in the PrintKit device control library.