August 2005
preliminary
The PrintKit Preliminary Production Printer Model Supplement 2.2-P7 contains model definitions that have not yet been validated for correctness. If you intend to use any of the definitions in the kit, we recommend that you first contact Northlake's technical support for up-to-date information concerning their use. If you use any of the definitions in the kit, we would appreciate your feedback as to their correctness and completeness.
See the current Printer Model Supplement for recent validated models.
>This kit should be applied to PrintKit 2.2-3 or later 2.2 versions ONLY.
This kit supplies definitions for the following printer models. For each model, version numbers indicate the revision of the preliminary Supplement Kit which introduced the definition, and any revisions which changed it.
2.2-P7 new
2.2-P3
2.2-P3, 2.2-P5
2.2-P7 new
2.2-P5
2.2-P3, 2.2-P4
2.2-P4
2.2-P7 new
2.2-P7 new
2.2-P5
2.2-P7 new
2.2-P6
2.2-P7 new
2.2-P7 new
The Quick Start document includes installation instructions and release notes. It is also included in the installation kit downloads.
| Quick Start | text, 3.5 Kb |
The downloadable kit for the Printer Model Supplement is a single self-extracting archive. Once you've transferred this file to your OpenVMS system, you run the file to unpack the individual components of the distribution, which consist of a VMSINSTAL saveset and the Read Me document.
The downloadable kit is a binary file. Be sure to keep this in mind if you need to transfer it between systems. (For instance, use TYPE IMAGE with FTP.) It should appear on your OpenVMS system with fixed-length 512-byte records.
Separate versions of the kit are provided for each of the OpenVMS hardware architectures. Each version contains a full kit – once unpacked, it can be installed on any of the hardware architectures – but each architecture requires its matching version of the self-extract code.
| PKPRELIM 2.2-P7 | vax, 1.08 Mb alpha, 1.1 Mb |
