Downloading and Installing the PrintKit Printer Model Definition Supplement
-------------------------------------------------------------------------

The PKPRELIM022-19 PrintKit Printer Model Definition Supplement should be
applied to PrintKit v2.2-3 or later 2.2 versions ONLY.  Do not use this
kit with any version below 2.2-3. 

You can install the supplement on an active OpenVMS system without
disturbing other operations.  The installation adds the new model
information to your existing configuration, so it does not disturb
existing PrintKit queue definitions. 

To install the supplement, you must be logged in to the SYSTEM account,
or another account with privileges to create and modify files in the
system directories.  

The kit is provided as a self-extracting executable, in Digital's FTSV
format: 

    PKPRELIM022-19.A-DCX_AXPEXE - Executable for AXP systems
    PKPRELIM022-19.A-DCX_VAXEXE - Executable for VAX systems

These are binary files.  Be sure to keep this in mind if you need to
transfer them between systems.  (For instance, use TYPE IMAGE with FTP.)

Retrieve the appropriate file for your system, then execute the file to
create the file PKPRELIM022-19.A, which is a VMSINSTAL kit.  Use
VMSINSTAL to install the kit.  For example:

    $ RUN PKPRELIM022-19.A-DCX_AXPEXE
    $ @SYS$UPDATE:VMSINSTAL PKPRELIM022-19 device:[directory]

If you have any questions, send email to PRINTKIT@NLS.COM.


OP/SYS: OpenVMS VAX/AXP
SOURCE: Northlake Software, Inc.
KIT INFORMATION:
        Kit Name:  PKPRELIM022-19
        Kit Applies To:  PrintKit version 2.2-3 and later 2.2 versions
        System Reboot Necessary:  No

KIT SUMMARY:

The materials in this PrintKit Model Definition Supplement Kit are
preliminary, and have not been validated for correctness.  If you intend
to use any of the definitions in the kit, we recommend that you first
contact Northlake's technical support for up-to-date information
concerning their use.  If you use any of the definitions in the kit, we
would appreciate your feedback as to their correctness, completeness, or
any problems you encountered using the PrintKit software. 

 1. This kit adds the following printer models to the PrintKit software:

        Canon GP
        Canon GP200/GP215
        Canon imageRunner 2200/3300
        Canon imageRunner 330/400 (note 1)
        Canon imageRunner 5000
        Canon imageRunner 600/550/60 (note 1)
        Compaq Laser Printer LN32
        HP 2500C Series
        HP Business Inkjet 3000                             2.2-18
        HP Color LaserJet 2500                              2.2-18
        HP Color LaserJet 5500                              2.2-18
        HP DesignJet 1050C, 1055CM
        HP LaserJet 2300 Series                             2.2-19 NEW
        HP LaserJet 4200 Series                             2.2-18
        HP LaserJet 4300 Series                             2.2-18
        IBM InfoPrint 20
        IBM InfoPrint 32, 40
        Kodak ImageSource M50CP
        Konica 7033/7040
        Kyocera Mita 4230/5230 (note 2)
        Kyocera Mita FS-8000C
        Kyocera Mita FS-9100DN                              2.2-18
        Kyocera Mita FS-9500DN                              2.2-18
        Kyocera Mita KM-4530                                2.2-19 NEW
        Kyocera Mita KM-5530                                2.2-19 NEW
        Lexmark T420                                        2.2-18
        Minolta Di350
        Minolta Di750
        Oce 8445, 8465
        QMS magicolor 2
        Ricoh Aficio 1013/1013F                             2.2-18
        Ricoh Aficio 1015                                   2.2-18
        Ricoh Aficio 1018/1018D                             2.2-18
        Ricoh Aficio 1022/1027/1032                         2.2-18
        Ricoh Aficio 1035/1045                              2.2-18
        Ricoh Aficio 1224C/1232C                            2.2-18
        Sharp AR-5132 Fiery LX
        Xerox 4510
        Xerox DocuColor 12
        Xerox DocuColor 1632/2240                           2.2-18
        Xerox Document Centre 535/545/555                   2.2-18
        Xerox Document Centre CS 50
        Xerox Document Centre System 20
        Xerox DocuPrint NC60
        Xerox Phaser 4400B, 4400DT, 4400DX, 4400N           2.2-18
        Xerox Phaser 6200B, 6200DP, 6200DX, 6200N           2.2-18
        Xerox Phaser 7300B, 7300DN, 7300DT, 7300DX, 7300N   2.2-18
        Xerox Phaser 8200B, 8200DP, 8200DX, 8200N           2.2-18
        Xerox WorkCentre Pro 416
        Xerox WorkCentre Pro 421                            2.2-18

        note 1: model definition has been changed since version 2.2-12 of the
            Preliminary Model Definition Supplement Kit. 
        note 2: model definition has been changed since version 2.2-15 of the
            Preliminary Model Definition Supplement Kit. 

 2. The kit corrects a problem in the PostScript layup handling that
    caused an error with some printer models.  To do this, it replaces
    the KIT_PS__NUP module in the PrintKit device control library. 

Copyright Northlake Software 1997-2003.  All rights reserved.
